Previous
Previous Product Image

FritzZyme® 460 | Saltwater | Marine Aquarium Sludge Cleaner

900.001,350.00
Next

Fritz RPM Liquid Magnesium | Saltwater | Marine | Reef Tanks Additives

1,200.004,000.00
Next Product Image

Fritz RPM Alkalinity | Saltwater | Marine | Reef Tanks Additives

1,000.002,900.00

Fritz RPM Calcium Buffer System Pt 1 Alkalinity

  • Highly Concentrated Carbonate Alkalinity
  • Add in Equal Parts with Fritz RPM Pt 2 Calcium
  • Individual Alkalinity, Calcium, and Magnesium Formulas
  • Great for Dosing Systems
  • Same High Quality Ingredients as RPM Marine Salt Mix
  • No Uneccessary Trace Elements

Expiry Date: December 22, 2025

Add to Wishlist
Add to Wishlist
SKU: N/A Category: Tag:
Trust Badge Image

Description

About Fritz RPM Calcium Buffer System Pt 1 Alkalinity

It is impossible to maintain a healthy, vibrant marine aquarium without also maintaining the proper levels of calcium and alkalinity. Fritz RPM Calcium Buffer System allows aquarists to maintain these two critical components in their proper ionic balance. Unlike other similar products, Fritz RPM Calcium Buffer System does not contain unmeasured and unnecessary ions and metals, which unchecked can lead to toxicity in the aquarium. Part 1 is formulated to provide the highest purity carbonate alkalinity, and when used in conjunction with Part 2, along with regular water changes with a high quality salt, will provide the correct ionic balance necessary for healthy and beautiful fish, corals and invertebrates.

Guaranteed Analysis: Alkalinity (min) 8,000 dKH

Ingredients: Deionized water, Sodium bicarbonate, Sodium carbonate

Directions & Dosage

Adjustment Dosage: Shake well before using. Begin by measuring the alkalinity of the aquarium water and determine how much you wish to increase it. Each mL of Pt 1 will increase the alkalinity in 1 US gallon (3.78 L) of water by 2.1 dKH (0.75 meq/mL). One teaspoon (5 mL) will raise 10 US gallons by 1.06 dKH (0.38 meq/L). Do not exceed 5 mL per 10 gallons daily, and always avoid an immediate +/* 0.2 change in pH.

Routine Dosing: Shake well before using. Before beginning routine dosing, adjust the alkalinity to within the range of 8-11 dKH (2.8-3.9 meq/L). Once alkalinity has been adjusted to the desired level, recommended starting dose is 5 ml (1tsp) each of Pt 1 and Pt 2 per 20 gallons of aquarium water per day. Maintain alkalinity between 8-11 dKH (2.8-3.9 meq/L) by testing daily and adjusting dose accordingly. Depending on the degree of calcification occurring in the aquarium, dose may have to be significantly increased over recommended starting dose to compensate for daily consumption.

  • For best results, add RPM Elements to a sump or high flow area of the the tank
  • No equipment restrictions necessary
  • No contraindications: can be used with all of our other products and meds
  • Safe for invertebrates
  • Easy measuring: the 4 oz, 8 oz and 16 oz bottle caps are approximately 5 mL volume; 32 oz bottle caps are approximately 10 mL volume
  • Some cloudiness is normal. Allow cloudiness to dissipate completely in between adding Pt 1 and Pt 2
  • Overdosed? Observe livestock for distress, perform small water changes if needed
  • Test for alkalinity with reliable alkalinity test kits

NOTE: If magnesium levels are too low, the addition of calcium and alkalinity supplements will simply result in the chemical precipitation of calcium carbonate. Adjust the magnesium concentration first with Fritz RPM Liquid Magnesium before adjusting calcium and alkalinity.

Additional information

Size

473ml, 946ml, 3.75 ltrs

Reviews

There are no reviews yet.

Be the first to review “Fritz RPM Alkalinity | Saltwater | Marine | Reef Tanks Additives”

Your email address will not be published. Required fields are marked *

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping